Materialien

• Perlen
• Nietstift

Werkzeuge

• Spitzzange
• Seitenschneider
• Flachzange

Schritt 1
String a bead or beads on the head pin. Remember to have at least an inch of wire above the last bead.

Schritt 2
Using the tips of your chain nose pliers, grab the wire directly above the beads.

Schritt 3
With your finger, push the wire to a 90° angle.

Schritt 4
Using you round nose pliers, grasp the wire right at the bend.

Schritt 5
Pull the wire around the round nose pliers until it is almost pointing directly down.

Schritt 6
Pull the wire around the round nose pliers until it is almost pointing directly down.

Schritt 7
Continue pulling the wire around the nose of the pliers until the loop is completely round.

Schritt 8
Continue pulling the wire around the nose of the pliers until the loop is completely round.

Schritt 9
Wrap the wire around the head pin. Continue wrapping the wire down to the bead.

Schritt 10
Using the wire cutters, cut off the extra wire as close as you can to the beads.

Schritt 11
Using the wire cutters, cut off the extra wire as close as you can to the beads.